StS-ISONOR is a certified training provider offering fall protection courses in accordance with NS 9610 Fall Protection. We provide certified training in theoretical training, area-specific training, and training in the use of rescue equipment. For anyone working at height or in environments where a fall without protection would have serious consequences. Fall accidents occur far too often at workplaces, and proper risk understanding combined with correct use of fall protection equipment is essential to prevent serious incidents. By participating in our fall protection and rescue courses, you will receive thorough and safe training from us as an NS 9610-certified training organisation.
About the Course
StS-ISONOR is a certified training provider offering fall protection courses in accordance with NS 9610 Fall Protection. We provide certified training in the theoretical and practical use of fall protection equipment tailored to different work areas.
Fall accidents occur far too often at workplaces. Proper risk understanding combined with correct use of fall protection equipment is essential to prevent serious incidents. By participating in our fall protection and rescue courses, you will receive thorough and safe training from us as an NS 9610-certified training organisation.
Whether you work offshore with fall protection or on rooftops and structures onshore, we provide practical and theoretical training tailored to your needs. After completing the course, you will have a solid understanding of legislation and standards, user instructions, employer/employee responsibilities, risk assessment and rescue planning, selection of correct fall protection and rescue equipment, pre-use checks and periodic inspection, correct use of fall protection equipment, and how to rescue a colleague when necessary.
Area-Specific Training (Chapter 11.4)
- Scaffolding
- Masts / Antennas / Drill Towers
- Work near Edges / Sloped Surfaces
- Confined Spaces / Shafts / Manholes / Tanks
- MEWPs / Climbing Scaffolds / Suspended Scaffolding
- Wind Energy
- Wood Pole and Mast Climbing
- Petroleum Industry
Training in Rescue Equipment (Chapter 12)
- Self-Rescue
- Co-worker Rescue
- Organised On-Site Rescue Preparedness (Fall Rescue)
Course Information
Duration
From 1 to 3 days. The duration varies depending on which areas of the standard the training covers. All courses include a theoretical part of approximately 4 hours.
Target Group
For anyone working at height or in environments where a fall without protection would have serious consequences. The course is suitable for all who will use fall protection equipment in their daily work, regardless of industry.
Entry Requirements
No specific entry requirements for the basic fall protection course. For co-worker rescue, participants must have completed an area-specific course, for example A.1 Scaffolding or A.2 Mast/Antenna/Drilling Tower. For organised rescue preparedness, participants must have completed A.8 Petroleum area-specific practical training.
Certificate Validity
The certificate is valid for 4 years. Maintenance of fall protection competence shall be carried out as required, but at least every 4 years. Maintenance of rescue competence shall be carried out as required, but at least every 2 years.
Course Location
Sandbrekketoppen 30, 5224 Nesttun
Training Objectives
The NS 9610-certified fall protection course is divided into a theoretical and a practical part. The course aims to give participants a thorough understanding of legislation, standards, fall theory, load calculations, and the practical use of various fall protection systems. Choose the area-specific course that matches your work area: