StS-ISONOR is one of the few training providers in Norway certified to deliver training on Skylotec ActSafe power ascenders.
About SKYLOTEC ActSafe Course
Skylotec states in its official user manuals:
“Users of Skylotec power ascenders must, before first use, undergo training in the safe use of the ascender conducted by Skylotec or a Skylotec-approved training partner.”
StS-ISONOR is an approved Skylotec training partner and is additionally certified to perform service and annual inspections on ACX, PMX, ICX, and ACC II power ascenders.
The ACX power ascender is used for safe access and various rope-based work tasks. This course is intended for participants using the power ascender for Rope Access, work at height, personnel lifting, and rigging/lifting operations. Participants receive thorough instruction in legislation, regulations, user manuals, correct use, hazards and limitations, pre-use inspections, the four lifting configurations, and relevant rescue methods.
According to the Norwegian Labour Inspection Authority, access using a power ascender is defined as §17-24 use of rope for access, work, and rescue. To perform these rope methods in the safest and most effective way possible, proper and good training is essential.
Target Group
This course is designed for rope access technicians, individuals with extensive experience in rope work, and companies requiring the SKYLOTEC ActSafe ACX power ascender for lifting personnel and equipment.
Prerequisites
Participants should hold a valid certificate in accordance with NS 9600, a valid course certificate from other rope access organisations, or extensive experience in rope work. Completion of the P-4.4 Rigger course and P-2.2 Slinger/Signaller course is advantageous.
Entry Requirements
All personnel participating in Skylotec ActSafe power ascender training must:
- Be medically fit and able to attend the entire course.
- Hold a valid NS 9600 certificate, an IRATA rope access qualification or have extensive experience in rope work.
Certificate Validity & Refresher Requirements
- The Skylotec ActSafe certificate for personnel and equipment lifting is valid for 24 months.
- Refresher training is required every 24 months to maintain certification.
Location
Sandbrekketoppen 30, Midttun
What You Learn
Participants receive comprehensive training in:
- Legislation and approvals governing the use of the Skylotec ActSafe ACX power ascender
- Basic requirements for equipment lifting
- General safety guidelines for working with ACX power ascenders
- Risks associated with Lithium batteries and correct handling procedures
- Rope types approved for use with Skylotec ActSafe power ascenders
- All ACX system components, their functions, and how to inspect them
- Assessing when the ACX must not be used
- Performing a complete pre-use inspection on the ACX
- Correct threading of the rope and safe rope handling during ascender operation
- Safe and correct use of NS-EN 1891 safety rope and NS-EN 12841 Type A backup device when working with ACX
- The four lifting configurations for both personnel and equipment, and how to switch between them while maintaining 100% fall protection
- Emergency procedures and rescue methods
Duration
1 day (7.5 hours) with a valid NS 9600 certificate, equivalent Rope Access certification or extensive experience in rope work, for example rock slope securing.
2.5 days (22.5 hours) without valid NS 9600 or other Rope Access certification
References
- Skylotec ActSafe ACX User Manual
- NS-EN 1808:1999+A1:2010 — Safety requirements for suspended access equipment
- NS-EN 14492-2:2019 — Cranes: Power-driven winches and hoists
- Machinery Directive regulations
- “Regulation on the Execution of Work”
