SKYLOTEC ActSafe PMX Power Ascender

About the Course

Skylotec requires that all users of its power ascenders complete certified training before first use:

“Users of Skylotec power ascenders must, before initial use, undergo training in the safe use of the power ascender from Skylotec or a Skylotec-approved training partner.”

StS-ISONOR is an approved Skylotec training partner and is additionally certified to perform service and annual inspections on ACX, PMX, ICX, and ACC II models.

The ActSafe PMX power ascender is used for safe access and rope-based work tasks. This course is intended for participants who will use the PMX for Rope Access, work at height, personnel lifting, and rigging/lifting operations.

Participants receive thorough instruction in legislation, regulations, user manuals, correct use, risks and limitations, pre-use inspections, the four lifting configurations, and relevant rescue methods.

According to the Norwegian Labour Inspection Authority, access using a power ascender is classified under §17-24 for rope access, work, and rescue. To perform these rope methods in the safest and most effective way possible, proper and good training is essential.

Target Group

This course is designed for Rope Access technicians and companies that require the use of the SKYLOTEC ActSafe PMX power ascender for lifting equipment and personnel.

Prerequisites

Participants should have:

• A valid NS 9600 Rope Access certificate, or
• Valid training from another Rope Access organisation

Recommended additional qualifications:

• P-4.4 Rigging Course
• P-2.2 Slinging and Signalling course

Entry Requirements

All participants must:

• Be medically fit and able to complete the full training programme
• Hold a valid Rope Access certificate

Certificate Validity & Refresher Requirements

• The Skylotec ActSafe certificate for personnel- and equipment lifting is valid for 24 months
• Refresher training is required every 24 months to maintain certification

Location

Sandbrekketoppen 30, Midttun

What You Learn

Participants receive comprehensive training in:

• Legislation and approvals for the Skylotec ActSafe PMX power ascender
• Basic requirements for equipment lifting
• General safety guidelines when working with PMX power ascenders
• Risks associated with combustion engines, including safe handling procedures
• Rope types approved for use with Skylotec ActSafe power ascenders
• All PMX components, their functions, and inspection requirements
• Assessing when the PMX must not be used
• Performing a complete pre-use inspection of the PMX
• Correct threading of the rope and safe rope handling during operation
• Safe and correct use of NS-EN 1891 safety rope and NS-EN 12841 Type A backup device
• The four lifting configurations for both personnel and equipment, and safe switching between them while maintaining 100% fall protection
• Emergency procedures and rescue methods

Duration

1 day (7.5 hours) with a valid NS 9600 certificate or equivalent Rope Access certification

2.5 days (22.5 hours) without valid NS 9600 or other Rope Access certification

References

• Skylotec ActSafe PMX User Manual
• NS-EN 1808:1999+A1:2010 — Safety requirements for suspended access equipment
• NS-EN 14492-2:2019 — Cranes: Power-driven winches and hoists
• Machinery Directive
• Norwegian “Regulation on the Execution of Work”